Drill tip gable screw

In order to build industrial and construction structures, gable screws are used, the material of gable screws is iron, steel or stainless steel, which is usually produced and supplied in a plated (galvanized) form. The appearance of the screw Gables are like self-tapping and threaded screws, with a drill-shaped part at the end of the threaded part, and its head or flower part is shaped like a box or a screwdriver. They are socket wrenches and socket head screws, which are produced in the form of two-sided or four-sided screws. They can be opened and closed with a screwdriver. Today, most of the gable screws are produced in the form of two-sided screwdrivers, because they are more demanding. and are of greater importance. Gable screws are produced in two types, Chinese and Taiwanese, and the Chinese sample is of lower quality than the Taiwanese type; the Taiwanese type of gable screws is made of Drill and mud are made with better quality, so the price of Taiwanese screws is higher than its Chinese type.

(Head screws have a different appearance, so that their tip is in the shape of a drill and a plastic washer whose top is made of metal is located under it (it increases the resistance between the screw and the part) The strength of the head screws in the arm is to close them, so that when installing the screws, there is no need to roll a plate or drill a hole, and the presence of ribs with larger distances makes it go into the metal quickly. The ribs of the screws The screw head is usually one millimeter more than normal screws.)

Shirvani screws are similar to self-tapping screws, their thickness is 6 mm and their length varies between 1.5 and 15 cm, the size of these screws is usually in the form of a screwdriver and a screwdriver. or four-sided). There is no need for a drill to use the screws for the roof, because the tip of the screw pierces the wall or metal by itself. The material of the screws for the roof is made of alloy. It is warm, which makes it resistant to dust and moisture.

Seremed screws with simple washers are the same as screws, with the difference that there is a plastic washer with a metal top under its flower, which increases the strength of the screw. The thickness of the seremed screws with washers is 4.2 mm. meters and its length is between 1.2 and 10 cm. To open and close the simple gable screws, you should use a series of two or four-sided screwdrivers.

Head screws are usually produced and supplied in thicknesses of 3.5 to 4.8 mm and in lengths of 1.2 to 10 cm. We use this type of screw when we want to hide our connections because mud These screws are inserted into the work.

The gable screws with box drill tip are used to connect metal structures, roofs and gables; these screws are hexagonal in shape and can be opened and closed with a wrench and screwdriver. The use of boxy roof screws does not require a drill because the screw itself will drill its own place.

1- High speed in execution and easy installation

2- No need for a drill

3- No need to roll plates and...

4- Resistant to oxidation

5- resistant to air pressure, moisture and rust

6- easy to open and close

7- reasonable price for consumption

Attachment screws can work well as long as they don't get rusted. The lifespan of the attic screws depends on its type, its installation method and the environmental conditions of its use. The attic screws are placed in coastal areas and Agricultural fields that are not installed correctly or hit by successive blows can cause rotting and destruction.

1- Resistance of gable screws in environmental conditions

(the most important factors for buying gable screws is its environmental resistance, which can be screwed according to its water-treated type 2- The quality of the ribs of the gable screws (when buying the gable screws, the ribs should be sharp and polished There is no dent or rust 3- The quality of the flower and its screw part (the flower part of the screws is of great importance, the flower of the screws must be completely prominent and Corrosion or indentation should be far away. Its two-sided or four-sided part should be completely hollow.)

Sivata company's pitch drill tip screw is offered to you with the following specifications:

- Approved
- Tested with 6 mil plate
- No heating
- No bending
- Padon burning of the drill tip
- Wender and Uti Naft Company
- Alozinc plating
- Material 1022
Professional specifications E

1SO1584 with equivalent DIN7504

Tools and fittings
Screws and nuts sellers
PVC doors and windows
UPVC
Greenhouse structures
Industrial towns
Shed construction
Pile construction
Machine construction
Agricultural tools

Iron door and window
Mas smoothing
Truck room construction

Gable head screws are screws that have a drill in the screw head, which plays the main and practical role in these screws. Self-tapping screws are available in two types, automatic self-tapping screws and self-tapping screws, each of which has specific and abundant applications in different industries. Self-tapping screws are easily inserted into the wood or the desired place and are closed, and there is no need to close the dowels and they are closed without them. But another type of countersunk screws are countersunk screws, which have many applications in the industry.

Curved screws are self-geared screws, that is, their threads are edged. And their gear distance is also more than cylindrical gears. Also, the ribs of the gable screws are one millimeter more than the ribs of the normal screws, and this makes these screws to be closed more easily, and with each rotation, more work is done. Self-tapping screws are very useful and can be used instead of using a drill, and the screw can be fixed in a special place without using a drill, that is, the screw itself will drill its own place.

In this The type of screw is usually determined by the unit of measurement of the length of the thread based on inches. Gable screws are available in the market today in two Chinese and Taiwanese models, the Chinese type has a relatively lower quality, but the Taiwanese type has a higher quality and a better drill and mud type, and their price is a little higher than the Chinese type. is.